Violin Forum/Message Board Forum Index Violin Forum/Message Board
Provided by Violin Vision
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

string tuning

 
Post new topic   Reply to topic    Violin Forum/Message Board Forum Index -> Violin Making and Restoration Forum
View previous topic :: View next topic  
Author Message
ollieken
Super Member


Joined: 26 Mar 2007
Posts: 281
Location: New Brunswick Canada

PostPosted: Tue Dec 09, 2014 11:15 am    Post subject: string tuning Reply with quote

It`s been quiet here with no one needing help Here`s a ?
A fellow has a fiddle that he said he never had to re tune it when he took it out of the case to play if he did it was very little .Now it is out a lot like three four turns on the fine tuners all strings . he heats with wood & he has a humidifier in his case . Old strings? Tail cord ? someone said it had a loose sound post, it could have moved ? what is your thought on This use it
to light the stove maybe . Ken... Matt easy now !!!!
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
kjb
Super Member


Joined: 06 Feb 2013
Posts: 385

PostPosted: Tue Dec 09, 2014 12:20 pm    Post subject: Reply with quote

if he kept tension on it , the soundpost would not move, but any of the other reasons, take a look at it, temp and humidity could be, wood heat is very dry.
Back to top
View user's profile Send private message
Dave Chandler
Super Member


Joined: 31 Oct 2007
Posts: 691
Location: Mt Mitchell in North Carolina

PostPosted: Thu Jan 22, 2015 1:34 pm    Post subject: sTRING TUNING Reply with quote

I'd check the height of the fingerboard, if projection is 27mm then end of FB should be about 20mm. If its dropping something structural may be going on.
_________________
Dave in the Blue Ridge
Southern Violin Association

"Success is the ability to go from one failure to the next with no loss of enthusiasm" Winston Churchill

"I took the road less travelled, and now I don't know where I am." Marco Polo
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
Mat Roop
Senior Member


Joined: 24 Mar 2007
Posts: 911
Location: Wyoming Ontario

PostPosted: Thu Jan 22, 2015 3:16 pm    Post subject: Reply with quote

I think Dave's got it right.... maybe loose seams, loose neck or loose fingerboard. Old strings stretch less than new ones ... they just break so that is not likely. If all strings are doing the same thing equally, I would doubt that it is slipping pegs... but might be.
His best solution is to bring it to an expert Luthier... I think there is one in Moncton.. goes by the name of Old Goat ... He'll be able to "shine" some light on it!Very Happy
Cheers... Mat
Back to top
View user's profile Send private message Send e-mail Visit poster's website
ollieken
Super Member


Joined: 26 Mar 2007
Posts: 281
Location: New Brunswick Canada

PostPosted: Thu Feb 12, 2015 6:50 am    Post subject: String Tuning Reply with quote

Hello Mat the lad found the old Goat Luthier & he found a loose sound post he put in a new post problem solved & fiddle sound great .
He was a bit scared the old goat may eat the fiddle or the bow but
the old goat had a big feed of East Coast Poutine râpée & he was not hungry saved the fiddle Ken
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Violin Forum/Message Board Forum Index -> Violin Making and Restoration Forum All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group